
SEAWARD DATALOGGER
--------

This package provides the Datalogger Driver for the following versions
of Windows:

- Windows 10    (x86 32/64 bit)
- Windows 8.1   (x86 32/64 bit)
- Windows 8     (x86 32/64 bit)
- Windows 7     (x86 32/64 bit)

You will need to install this driver if your PC does not recognise your Seaward device when connected. 


CONTENTS
--------
The Datalogger Driver package contains the following files and directories:
- slabvcp.inf -- Driver information file
- CP210xVCPInstaller_x64.exe -- 64-bit installer
- CP210xVCPInstaller_x86.exe -- 32-bit installer
- SLAB_License_Agreement_VCP_Windows.txt -- Software License

Additional files needed by installer
- dpinst.xml
- slabvcp.cat
- x64/
- x86/

INSTALLING
----------
Unzip the .zip file and you will have a directory containing the
driver installer files.

### Prompted install ###

If Windows prompts you to install a driver for a CP210x device
(for example, if you plug a CP210x into your computer):

1. Use the dialog to browse for the driver location
2. Locate the driver folder (that you previously unzipped)
3. Follow the instructions

### Manual install ###

1. Using Windows File Explorer, locate the driver folder
   (that you previously unzipped)
2. Determine if you have 32-bit or 64-bit Windows
3. Double click to run the .exe file named CP210xVCPInstaller_xnn.exe
   (where xnn is x64 for 64-bit and x86 is for 32-bit)
4. Follow the instructions

UNINSTALLING
------------
1. The device must be plugged in
2. Run Device Manager
3. Locate the device you want to uninstall
4. Right click on the device and choose "uninstall"
5. Follow the instructions

SUPPORT
-------

How to download from the Seaward PV200/210 using the Datalogger:

https://www.youtube.com/watch?v=l1mEMKoVOhc

How to download from the Seaward PV150 using the Datalogger:

https://www.youtube.com/watch?v=RV0MhAeqZ-s

How to download from the Seaward Solar Utility Pro using the Datalogger:

https://www.youtube.com/watch?v=vI0DeKZLAHw


